Daewoo CIELO EURO III Manual page 165

1E – 37 ENGINE ELECTRICAL
10. Install the outside cover.
A102E201
11. Position the rotor assembly shaft with the drive end
frame in the slip ring end assembly until the gap be-
tween the outer lace and the end frame casting is
1.9 mm (0.075 inch).
12. Install the generator through-bolts.
Tighten
Tighten the generator through-bolts to 10 NSm (89 lb-
in).
A102E203
13. Position the fan, the collars, and the pulley on the
rotor shaft and secure with the nut.
Tighten
Tighten the generator drive end bearing nut to 81 NSm
(60 lb-ft).
14. Install the generator. Refer to "Generator" in the On-
Vehicle Service section.
A102E251
DAEWOO T-154 BL2,3