Manifold Absolute Pressure Sensor (Typical) - Daewoo CIELO EURO III Manual

DAEWOO T-154 BL2,3
MANIFOLD ABSOLUTE PRESSURE
SENSOR (TYPICAL)
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the vacuum hose from the manifold abso-
lute pressure (MAP) sensor.
3. Disconnect the MAP connector.
4. Remove the MAP sensor mounting bracket bolt.
5. Remove the bolts and nuts securing the MAP sensor
to the mounting bracket.
A102F028
Installation Procedure
1. Insert the MAP sensor into the mounting bracket.
2. Install the bolts through the MAP sensor and the
bracket. Install the retaining nuts.
Tighten
Tighten the MAP sensor retaining bolts and nuts to
8 NSm (71 lb-in).
3. Install the MAP sensor and the mounting bracket to
the firewall with the mounting bracket bolt.
Tighten
Tighten the MAP sensor mounting bracket bolt to
4 NSm (35 lb-in).
4. Connect the MAP sensor connector.
5. Connect the vacuum hose to the MAP sensor.
6. Connect the negative battery cable.
A102F027
ENGINE CONTROLS 1F – 399