1F – 262 ENGINE CONTROLS
DTC P0337 58X Crankshaft Position (CKP) Sensor No Signal (Cont'd)
Step
1. Turn the ignition OFF.
9
2. Replace the ECM.
Is the repair complete?
1. Using the scan tool, clear the Diagnostic Trouble
Codes (DTCs).
2. Start the engine.
3. Operate the vehicle within the conditions for
10
setting this DTC as specified in the supporting
text.
Does the scan tool indicate that this diagnostic ran
and passed?
Check if any additional DTCs are set.
11
Are any DTCs displayed that have not been diag-
nosed?
Action
Value(s)
Yes
–
Go to Step 10
–
Go to Step 11
Go to
–
applicable
DTC table
No
–
Go to Step 2
System OK
DAEWOO T-154 BL2,3