Daewoo CIELO EURO III Manual page 147

1E – 1 9 ENGINE ELECTRICAL
6. When testing a series coil for ground, separate the
series and the shunt coil strap terminals during the
test.
6.1 With the strap terminals not touching the case
or the other ground, using a test lamp, place
one lead on the grounded brush holder and
the other lead on either insulated brush.
6.2 If the lamp is lit, a grounded series coil is indi-
cated and must be repaired or replaced.
6.3 Test for an open circuit on each insulated
brush by placing one lead on the series coil
terminal and the other lead on the insulated
brush.
6.4 If the test lamp is not lit, the series coil is open
and will require repair or replacement.
A102E217
7. Check the armature to see if it turns freely. If the ar-
mature does not turn freely, break down the assembly
immediately, starting with Step 14. Otherwise, give
the armature a no-load test.
A102E218
DAEWOO T-154 BL2,3