Electric Cooling Fan - Main - Daewoo CIELO EURO III Manual

1D – 12 ENGINE COOLING
Installation Procedure
1. Install a new ring seal to the coolant pump.
2. Coat the sealing surface of the ring seal with Lubri-
plate .
3. Install the coolant pump to the engine block.
4. Secure the coolant pump to the engine block with the
mounting bolts.
Tighten
Tighten the coolant pump mounting bolts to 10 N m
(89 lb-in).
5. Install the rear timing belt cover. Refer to Section 1B,
DOHC Engine Mechanical.
6. Refill the engine cooling system. Refer to "Draining
and Refilling the Cooling System" in this section.
A102D042
ELECTRIC COOLING FAN – MAIN
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the cooling fan electrical connector.
3. Remove the fan shroud mounting bolts.
4. Lift the fan shroud assembly upward, and remove the
fan shroud assembly from the vehicle.
5. Remove the fan blade from the fan motor by remov-
ing the nut at the center of the fan hub.
A102D006
6. Remove the fan motor retaining screws.
7. Remove the fan motor from the shroud.
A102D007
DAEWOO T-154 BL2,3