DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 21
5. Install the cylinder head bolts in the sequence shown.
A402B008
Tighten
Tighten the cylinder head bolts in the sequence pre-
viously shown to 25 N m (18 lb-ft) using a torque
wrench. Use the angular torque gauge KM-470-B
to tighten the cylinder head bolts another 70 degrees
plus 70 degrees plus 30 degrees.
A102B172
6. Connect the throttle cable at the throttle body and at
the intake manifold.
7. Install the intake manifold support bracket retaining
bolt to the coolant distributor.
Tighten
Tighten the intake manifold support bracket retaining
bolts to 22 N m (16 lb-ft).
A102B029