DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 81
3. Check the contact pattern on the valve head and in
the cylinder head.
4. Clean the valves, the valve guides, and the cylinder
head.
A102B057
Valve Grind
1. Ensure that there are no crater line burns on the valve
cone.
2. The valve may be reground only two times. Do not
grind the valve stem end.
3. The angle at the valve face angle is 46 degrees.
A102B066
4. Check the valve stem projection using the distance
gauge KM-419.
A102B058