Daewoo CIELO EURO III Manual page 41

DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 29
20. Remove the camshaft.
A102B077
Installation Procedure
1. Install the camshaft.
2. Install the camshaft pressure plate.
3. Install the camshaft pressure plate bolts.
Tighten
Tighten the camshaft pressure plate bolts to 10 N m
(89 lb-in).
A102B076
4. Measure camshaft end play. Camshaft end play
should be 0.04 to 0.16 mm (.016 to 0.64 inch).
5. Install the EI system ignition coil mounting plate.
6. Install the EI system ignition coil mounting plate
bolts.
Tighten
Tighten the EI system ignition coil mounting plate
bolts to 10 N m (89 lb-in).
7. Install the EI system ignition coil.
8. Install the EI system ignition coil mounting bolts.
Tighten
Tighten the EI system ignition coil mounting bolts to
10 N m (89 lb-in).
9. Connect the ignition wires at the EI system ignition
coil.
A102B075 10. Connect the EI system ignition coil connector.