DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 55
26. Remove the intake manifold.
27. Remove the intake manifold gasket.
28. Clean the sealing surfaces of the intake manifold
and the cylinder head.
A102B034
Installation Procedure
1. Install the intake manifold gasket.
2. Install the intake manifold.
3. Install the intake manifold retaining nuts and the en-
gine lift bracket bolt in the sequence shown.
Tighten
Tighten the intake manifold retaining nuts in the se-
quence shown to 25 N m (18 lb-ft).
Tighten the engine lift bracket bolt to 25 N m (18 lb-ft).
A102B035
4. Install the intake manifold support bracket.
5. Install the intake manifold support bracket retaining
bolts.
Tighten
Tighten the intake manifold support bracket retaining
bolts to 22 N m (16 lb-ft).
6. Install the alternator adjusting bracket and the bolts.
Tighten
Tighten the alternator adjusting bracket retaining
bolts to 25 N m (18 lb-ft).
7. Install the alternator drive belt.
A102B118