Daewoo CIELO EURO III Manual page 286

1F – 117 ENGINE CONTROLS
DTC P0113 Intake Air Temperature (IAT) Sensor High Voltage (Cont'd)
Step
1. Tur the ignition switch OFF.
11 2. Replace the ECM.
Is the action complete?
1. Using the scan tool, clear the DTCs.
2. Start the engine and idle at normal operating
temperature.
3. Operate the vehicle within the conditions for
12
setting this DTC as specified in the supporting
text.
Does the scan tool indicate that this diagnostic ran
and passed?
Check if any additional DTCs are set.
13
Are any DTCs displayed that have not been diag-
nosed?
Action Value Yes
–
Go to Step 12
–
Go to Step 13
– Go to applicable
DTC table
No
–
Go to Step 2
System OK
DAEWOO T-154 BL2,3