Intake Manifold - Daewoo D1146 Maintenance Manual

3.1.23. Intake manifold

Unscrew the intake manifold fixing bolts
and remove the intake manfold from the
cylinder head.
Disassemble the intake manifold gasket
and discard it.
3.1.24. Cooling water pipe
Unscrew the cooling water pipe fixing
bolts and remove the cooling water pipe
from the cylinder head.
Remove the cooling water pipe gasket
and finish the surface with a scraper.
CAUTION :
Be sure that piece of the gasket do
not come into the cooling water
passage.
3.1.25. Rocker arm
Remove the rocker arm bracket fixing
bolts in reverse order (zigzag method) of
assembling and disassemble the rocker
arm.
Take out the push rod upwards.
Disassembly of rocker arm assembly
- Remove the snap ring fron the both
ends of rocker arm shaft by means of a
plier.
- Remove the washer, rocker arm,
bracket and spring from the rocker arm
shaf in sequence.
- Press out the rocker arm bush.
Air heater
G1088
39
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Intake manifold
G1056
Printed in Jan. 2001 PS-MMA0415-E1A