Daewoo CIELO EURO III Manual page 158

DAEWOO T-154 BL2,3
17. Position the commutator end frame/brush holder as-
sembly, lining up the end frame holes with the
through-bolt holes in the housing.
A102E215
18. Install the starter through-bolts.
19. Install the starter. Refer to "Starter" in this section.
Tighten
Tighten the starter through-bolts to 6 NSm (53 lb-in).
A102E239
GENERATOR
Disassembly Procedure
1. Remove the generator. Refer to "Generator" in the
On-Vehicle Service section.
2. Mark a match line that cannot easily be removed on
the end frame to make assembly easier.
3. Pry off the plastic cover to expose the stator connec-
tions.
A102E201
ENGINE ELECTRICAL 1E – 30