Daewoo CIELO EURO III Manual page 322

1F – 153 ENGINE CONTROLS
DTC P0132 Oxygen Sensor (O2S 1) High Voltage (Cont'd)
Step
1. If disconnected, reconnect the O2S 1 electrical
connector.
2. Using the scan tool, clear the DTCs.
3. Start the engine and idle at normal operating
temperature.
7
4. Operate the vehicle within the conditions for
setting this DTC as specified in the supporting
text.
Does the scan tool indicate that this diagnostic ran
and passed?
Check if any additional DTCs are set.
8 Are any DTCs displayed that have not been
diagnosed?
Action Value Yes
–
Go to Step 8
– Go to applicable
DTC table
No
Go to Step 2
System OK
DAEWOO T-154 BL2,3