Daewoo CIELO EURO III Manual page 57

DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 45
7. Clean the oil pump housing and all of the parts.
8. Inspect all of the parts for signs of wear. Refer to
"Engine Specifications" in this section.
9. Coat all of the oil pump parts with clean engine oil.
10. Reinstall all of the oil pump parts.
Notice: Pack the oil pump gear cavity with petroleum
jelly to ensure an oil pump prime. Failure to do this can
damage the engine.
11. Install the oil pump rear cover and the bolts.
Tighten
Tighten the oil pump rear cover bolts to 6 N m (53 lb-
in).
12. Install the safety relief valve, the spring, the washer,
and the bolt.
Tighten
A202B001
Tighten the oil pump safety relief valve bolt to 30 N m
(22 lb-ft).
Installation Procedure
1. Apply a bead of room temperature vulcanizing (RTV)
sealer to the oil pump gasket.
2. Install a new oil pump gasket to the oil pump.
3. Coat the threads of the oil pump bolts with Loctite
573.
4. Install the oil pump to the engine block with the bolts.
Tighten
Tighten the oil pump retaining bolts to 10 N m (89 lb-
in).
A102B065