Daewoo CIELO EURO III Manual page 426

1F – 256 ENGINE CONTROLS
DTC P0336 58X Crankshaft Position (CKP) Sensor Extra/Missing Pulses (Cont'd)
Step
1. Using the scan tool, clear the DTCs.
2. Start the engine and idle at normal operating
temperature.
3. Operate the vehicle within the conditions for
11
setting this DTC as specified in the supporting
text.
Does the scan tool indicate that this diagnostic ran
and passed?
Check if any additional DTCs are set.
12
Are any DTCs displayed that have not been diag-
nosed?
Action Value Yes
–
Go to Step 12
– Go to applicable
DTC table
No
Go to Step 2
System OK
DAEWOO T-154 BL2,3