1E – 31 ENGINE ELECTRICAL
Notice: If the stator connections are not welded, melt
the lead. Avoid excessive heating, as it can damage the
diodes in the rectifier bridge.
4. Remove the stator connections from the rectifier
bridge terminals by cutting the wires.
A102E258
5. Remove the generator through-bolts.
A102E203
Important: The fastening torque of this nut is 81 NSm
(60 lb-ft) and may not normally be unfastened using
hand strength.
6. Move to the drive end of the generator and remove
the drive end bearing nut.
A102E251
DAEWOO T-154 BL2,3