Daewoo CIELO EURO III Manual page 36

1B – 24 SOHC ENGINE MECHANICAL
22. Align the mark on the crankshaft gear to the notch at
the bottom of the rear timing belt cover.
A102B030
23. Install the timing belt. Refer to "Timing Belt" in this
section.
24. Check the timing belt tension. Refer to "Timing Belt
Check and Adjust" in this section.
25. Install the lower timing belt cover.
26. Install the lower timing belt cover bolts.
Tighten
Tighten the lower timing belt cover bolts to 10 N m
(89 lb-in).
27. Install the power steering pump and the bolts, if
equipped. Refer to Section 6B, Power Steering
Pump.
28. Install the engine mount bracket-to-engine mount re-
taining bolts if the power steering pump was installed.
Tighten
Tighten the engine mount bracket-to-engine mount
retaining bolts to 60 N m (44 lb-ft).
A102B020
29. Install the crankshaft pulley.
30. Install the crankshaft pulley bolt.
Tighten
Tighten the crankshaft pulley bolt to 95 N m (70 lb-ft)
using a torque wrench. Use the angular torque gauge
KM-470-B to tighten the crankshaft pulley bolt anoth-
er 30 degrees plus 15 degrees.
31. Install the power steering pump pulley, if equipped.
32. Install the power steering pump pulley bolts, if
equipped.
Tighten
Tighten the power steering pump pulley bolts to
25 N m (18 lb-ft).
A102B005
DAEWOO T-154 BL2,3