Daewoo CIELO EURO III Manual page 82

1B – 70 SOHC ENGINE MECHANICAL
33. Install the right front wheel well splash shield.
34. Install the right front wheel. Refer to Section 2E,
Tires and Wheels
35. Connect the fuel feed line to the fuel rail.
36. Connect the fuel return line to the fuel pressure reg-
ulator.
37. Connect all of the necessary vacuum lines, includ-
ing the brake booster vacuum hose.
A402B009
38. Connect the pre-converter O
39. Connect the starter solenoid "S" terminal wire.
40. Connect the alternator voltage regulator connector.
41. Connect the CTS connector.
42. Connect the ECT sensor connector and the knock
sensor connector, if equipped.
43. Connect the TP sensor connector.
44. Connect the IAC valve connector.
45. Connect the CMP sensor connector.
A102B016
46. Connect the electrical connectors at the fuel injec-
tors.
47. Connect the electrical connector at the EI system
ignition coil and the ECM ground terminal at
the intake manifold.
48. Install the air intake tube between the throttle body
and the air filter housing.
49. Connect the breather tube to the valve cover.
50. Connect the IAT sensor connector.
A102B001
sensor connector.
2
DAEWOO T-154 BL2,3