Daewoo CIELO EURO III Manual page 351

DTC P0140 Heated Oxygen Sensor (HO2S 2) No Activity (Cont'd)
Step
1. Using the scan tool, clear the DTCs.
2. Start the engine and idle at normal operating
temperature.
3. Operate the vehicle within the Conditions for
11
setting this DTC as specified in the supporting
text.
Does the scan tool indicate that this diagnostic has
run and passed?
Check if any additional DTCs are set.
12
Are any DTCs displayed that have not been diag-
nosed?
DAEWOO T-154 BL2,3
Action
ENGINE CONTROLS 1F – 182
Value Yes
–
Go to Step 12
– Go to applicable
DTC table
No
Go to Step 2
System OK