Engine - Daewoo CIELO EURO III Manual

DAEWOO T-154 BL2,3
SOHC ENGINE MECHANICAL 1B – 61

ENGINE

Tools Required
KM-470-B Angular Torque Gauge
Removal Procedure
Important: On vehicles equipped with a manual trans-
axle, the manual transaxle must be removed before en-
gine removal. Refer to Section 5B, Five-Speed Manual
Transaxle.
1. Remove the fuel pump fuse.
2. Start the engine. After it stalls, crank the engine for
10 seconds to rid the fuel system of fuel pressure.
3. Remove the hood. Refer to Section 9R, Body Front
End.
4. Drain the engine oil.
5. Disconnect the negative battery cable.
6. Disconnect and separate the battery positive cable.
7. Disconnect the negative battery cable from the ve-
hicle frame.
A102B013
8. Discharge the air conditioning (A/C) system, if
equipped. Refer to Section 7B, Manual Control
Heating, Ventilation, and Air Conditioning System.
9. Disconnect the intake air temperature (IAT) sensor
connector.
10. Remove the air intake tube from the throttle body
and the air filter housing.
11. Disconnect the breather tube from the valve cover.
A402B002