1E – 15 ENGINE ELECTRICAL
Installation Procedure
1. Place the starter assembly in position.
2. Install the upper and the lower starter mounting bolts.
Tighten
Tighten the starter mounting bolts to 43 NSm (32 lb-
ft).
A102E235
3. Position the starter electrical wire on the solenoid ter-
minal.
4. Install the starter solenoid nuts.
Tighten
Tighten the starter solenoid nuts to 15 NSm (11 lb-ft).
A102E236
BATTERY/BATTERY TRAY
Removal Procedure
1. Disconnect the negative battery cable and then dis-
connect the positive battery cable.
2. Remove the nuts from the battery rods that fasten the
battery hold-down bar clamp.
A102E241
DAEWOO T-154 BL2,3