Daewoo CIELO EURO III Manual page 556

1F – 386 ENGINE CONTROLS
5. Install the fuel rail assembly into the cylinder head.
6. Install the fuel rail retaining bolts.
Tighten
Tighten the fuel rail retaining bolts to 25 NSm (18 lb-
ft).
7. Connect the fuel inlet hose line.
8. Connect the fuel injector harness connectors. Ro-
tate the fuel injector as required to avoid stretching
the wire harness.
9. Install the fuel pressure regulator. Refer to "Fuel
Pressure Regulator (SOHC)" in this section.
10. Install the exhaust gas recirculation valve, if
equipped. Refer to "Exhaust Gas Recirculation
Valve (SOHC)" in this section.
11. Connect the negative battery cable.
12. Perform a leak check of the fuel rail and the fuel in-
A102F006
jectors.
DAEWOO T-154 BL2,3