Xerox DocuColor 12/DCCS50 Service Manual page 1598

End Wall Motor
End Wall Mechanical Drive Components
1. End Wall Motor
A +24 VDC stepper motor. Raises and lowers the End Wall.
2. End Wall
Raised to close off the end of the Compiler Tray. Lowered to open the end of the Compiler
Tray and allow the paper set to move to the Stapler.
Principles of Operation
End Wall Motor
The End Wall Motor raises and lowers the Compiler Tray End Wall
sent to the Compiler Bin, the Finisher PWB switches on the End Wall Motor. The End Wall
Motor raises the End Wall of the Compiler Tray. When a set of paper is collected in the Com-
piler Bin and the set is ready to be sent to the Stapler, the End Wall Motor lowers the End Wall
to allow the paper set to move to the Stapler.
Figure 1 Compiler End Wall and Its Associated Components
1/05
10-178
manuals4you.com manuals4you.com
(Figure 1). When paper is
Reissue
DocuColor 12/DCCS50