Table of Contents
Advertisement
DADF System Control
The DADF Control PWB monitors the status and controls the operation of the DADF. The
DADF Control PWBA also accepts commands from the Pre-IPS PWBA and provides it with
status information, such as DADF Belt Motor status and a Document Ready signal. However,
the Pre-IPS is itself partially controlled by the IOT CPU PWBA (via the Post-IPS PWBA).
Therefore, DADF control is ultimately a shared function of these three PWBAs. Command and
status communication with the DADF uses a bidirectional serial communications port. Refer to
Figure 1
for a DADF simplified block diagram and
Figure 2
for the communication links
between the DADF and the machine.
Reissue
Principles of Operation
1/05
DADF System Control
DocuColor 12/DCCS50
10-57
Advertisement
Table of Contents
Troubleshooting
