Eject/Offset Functional Description - Xerox DocuColor 12/DCCS50 Service Manual

1. Stapler Paper Path Components
1. Stapler Front Corner Sensor
Monitors the position of the Stapler Head for stapling in the front corner of a paper set.
2. Stapler Front Straight Sensor
Monitors the position of the Stapler Head for stapling at the front edge of a paper set.
3. Stapler Rear Straight Sensor
Monitors the position of the Stapler Head for stapling at the rear edge of a paper set.
4. Stapler Assembly
Contains the Stapler Head and Stapler Cartridge.
Reissue
DocuColor 12/DCCS50

Eject/Offset Functional Description

The Eject and Offset transport and offset compiled sets of paper into the Stacker Bin.
1. Eject Clamp/Offset Motor
Raises and lowers the Eject Chute and Pinch Roll, and drives the Offset Actuator.
2. Eject Clamp Sensor
Monitors whether the Eject Roll is in the up or the down position.
3. Offset Home Sensor
Monitors whether or not the Eject Roll is in the home position.
4. Eject Motor
Drives the Eject Shaft Assembly.
After the set is stapled, the Eject Roll rotates clockwise and drives the set out of the Compiler
Tray and toward the Offset Rolls (Figure
1/05
Stapler Functional Description, Eject/Offset Func-
10-171
1).
Principles of Operation