Offset Catch Tray Electrical Connections; Decurler Simplified Block Diagram - Xerox DocuColor 12/DCCS50 Service Manual

Figure 3 Decurler Simplified Block Diagram
Principles of Operation
Mailbox/Sorter Electrical Connections, Offset Catch

Offset Catch Tray Electrical Connections

The Offset Catch Tray (OCT) does not have a control processor. Discrete lines from one of two
assemblies provide direct control of the OCT. If a Mailbox/Sorter is not installed, the OCT is
connected to the IOT Drive PWBA, as shown in
Sorter, the OCT is connected to the Mailbox/Sorter Control PWBA as shown in
PWBAs become aware of the OCT by detecting the level on the OCT Det line. The OCT Mot
Fwd and OCT Mot Rev control lines directly control the OCT motor and cause it to move the
tray toward the front or back of the machine. The OCT Full status line indicates that the OCT
paper capacity has been reached. The OCT Home Sensor indicates when the OCT is in the
front-most (Home) position, while the OCT Position Sensor indicates that the tray is in the rear-
most position.
1/05
10-148
manuals4you.com manuals4you.com
Figure 1. If the OCT is installed with a Mailbox/
Figure 1. These
Reissue
DocuColor 12/DCCS50