Xerox DocuColor 12/DCCS50 Service Manual page 1399

Convenience Stapler Installation
Procedure
NOTE: The wing with convenience stapler may come pre assembled.
1. Unpack the wing with convenience stapler and hardware
Figure 1 Unpack
2. 1. Remove the two 5.5 mm screws
2. Remove the upper left side panel.
Reissue
DocuColor 12/DCCS50
(Figure 1).
(Figure 2).
Figure 2 Remove the Screws
3. 1. Remove the two 5.5 mm screws
2. Remove the mounting bracket from the Convenience Stapler.
1/05
9-25
(Figure 3).
Installation Instructions
Convenience Stapler Installation