Stacker Tray Motor And Sensors - Xerox DocuColor 12/DCCS50 Service Manual

Offset Mechanical Drive Components
1. Eject Clamp/Offset Motor
A +24 VDC motor. Provides drive for both the Eject Clamp Pinch Rolls and the Eject Rolls.
2. Offset Cam
Driven by the Eject Clamp Offset Motor. As the cam rotates, the high and low points slide
the Offset Rolls across the paper path.
Figure 2 Eject/Offset Mechanical Details 2
Reissue
DocuColor 12/DCCS50
3. Eject Clamp Cam
Driven by the Eject Clamp Offset Motor. As the cam rotates, the high and low points move
the Eject Clamp Pinch Rolls up and down.
4. Eject Clamp Sensor
Monitors the position of the Eject Clamp Cam.
(See Figure 2.)

Stacker Tray Motor and Sensors

The Stacker Tray has a separate Motor that raises or lowers the Tray to accommodate the
amount of paper sent to it. The Stacker Tray is moved by Stacker Tray Drive Belts that are
driven by the Stacker Motor. As the Belts rotate, the Tray raises or lowers depending on the
direction of Belt rotation. Sensors monitor the presence of paper and the position of the Tray.
(See Figure 1.)
1/05
Eject Clamp/Offset Motor, Stacker Tray Motor and
10-183
Principles of Operation