Control Panel Mode Is Changed By Pressing The; Mode Key; Monitoring Mode - Mitsubishi Electric FR-E540 K-EC Series Instruction Manual

3.2.2 Control panel mode is changed by pressing the

Monitoring mode

Hz
MON
PU EXT
MODE SET REV
STOP
FWD
RESET
(Note) The frequency setting mode is displayed only in the PU operation mode.
3.2.3 Monitoring mode
Operation command indications in the monitoring mode
EXT is lit to indicate external operation.
PU is lit to indicate PU operation.
Both EXT and PU are lit to indicate combined operation.
The monitor display can also be changed during operation.
Frequency monitor
PU
MODE SET REV
STOP
FWD
RESET
MODE
To 3.2.4 Frequency setting mode (Note3)
Note: 1. Hold down the
current monitor to the power-on monitor.
2. Hold down the
errors including the most recent one.
3. To the parameter setting mode when in the external operation mode.
Frequency setting
mode (Note)
Hz
MODE
PU
MODE SET REV
STOP
FWD
RESET
Help mode
MODE
PU EXT
MODE SET REV
STOP
FWD
RESET
Current monitor
Hz
MON
SET
EXT
A
MON
PU EXT
SET
*1
key marked *1 for more than 1.5 seconds to change the
SET
key marked *2 for more than 1.5 seconds to display four
SET
50
OPERATION
MODE
Parameter setting
mode
MODE
PU EXT
MODE SET REV
STOP
FWD
RESET
Operation mode
MODE
PU
MODE SET REV
STOP
FWD
RESET
Voltage monitor Alarm monitor
Alarm absent
SET SET
MON
PU EXT
SET
SET
*1
*1
Alarm present
SET
key
MODE
SET
*2