Using Functions With Mitel Opencount; Setting Functions By Remote Control - Mitel 6869 SIP User Manual

Using functions with Mitel OpenCount

Mitel OpenCount is a software package for call logging management
in communication systems and offers a clear overview over all cost
structures. The application can be integrated into your MiVoice
Office 400 communication system and enables the logging, the
administration, and the analysis of all call and connection data.
If a Mitel OpenCount is integrated into your MiVoice Office 400 com-
munication system, the following additional feature is also available
on your phone.
Activating PIN telephony
The PIN telephone service is part of Mitel OpenCount. The possible appli-
cations of the PIN telephony depend on the area of use, for example in the
area of health care and accommodation/hotel:
• Independently from the phone you can make external calls for a fee.
The credit may be limited.
• You can charge the charges and the call information of your outgoing
and incoming calls to specific projects.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 99).
For further information, please see the product-specific user guides for
Mitel OpenCount on our website (www.mitel.com) or contact your system
administrator.
Activating/deactivating PIN call:
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.

Setting functions by remote control

This section explains how you can alter your phone's settings even if
you are not directly at your phone.
You are not at your desk and want to set various functions on your phone
from a different phone.
Mitel 6867 SIP / Mitel 6869 SIP
eud-1664/2.0 – R6.0 – 06.2018
PIN call / PIN call rebook.
Phoning
81