Unpacking And Installation - Canon PC920 Service Manual

CHAPTER 9 INSTALLATION
II. UNPACKING AND INSTALLATION
When a piece of metal is brought in from a cold to warm place, droplets of water tend to form
on its surface. This phenomenon is known as "condensation" and, in copiers, can cause blank
copies.
If the machine has been brought in from a cold place, leave it alone at least for one hour before
starting to install it.
A.

Unpacking and Installation

Step
1 Take out the copier and the attachments from
the shipping box, and check to make sure that
none is missing:
2 Remove the packaging bag and all fixing tape.
3 Remove the shipping attachment [1] (gold-
colored screw) from the left of the machine.
9-2
Work
COPYRIGHT © 1999 CANON INC.
Checks and remarks
• Cassette
• Copy tray
• Power cord
• ADF auxiliary tray (ADF type only)
• User's Manual
• Manual feed tray (for some areas only)
• Language label for cassette (included with
universal cassette)
• Language label for ADF (ADF type only)
Shipping attachment [1]
You will be storing the shipping attachment
[1] inside the machine in step 9.
CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)