Pickup/Feeding System; 2Adjusting The Manual Feed Pickup Horizontal Registration; 3Adjusting The Front Deck Pickup Horizontal Registration - Canon iR C6800 Series Service Handbook

Chapter 2

2.7 Pickup/Feeding System

2.7.1 Adjusting
Horizontal Registration
After Replacing
Pickup Cassette
Make prints using the cassettes 3 and 4 as the source
of paper, and check to make sure that the left/right
margin is as indicated.
- If not as indicated, make the following adjustments:
1) Press the cassette release button, and slide out the
cassette 3 or 4 to the front.
2) Open the upper right cover and the lower right
cover.
3) Insert a screwdriver through the opening in the
front right stay; then, loosen the screw [1], and adjust
the position of the adjusting plate [2].
[2]
[1]
F-2-64
- move the adjusting plate toward the rear to increase
the left margin.
- move the adjusting plate toward the front to decrease
the left margin.
4) Tighten the screw.
5) Close the upper right cover and the lower right
cover.
6) Put the cassette 3 or 4 back in the machine.
2-54
the
the
0003-9954
2.7.2 Adjusting the Manual
Feed Pickup Horizontal
Registration
Make copies using the manual feed tray as the source
of paper, and check to make sure that the left/right
margin is as indicated.
- if not, make the following adjustments:
1) Loosen the screw [1], and move the position of the
slide guide [2] to adjust the horizontal registration.
[2]
[1]
F-2-65
2) Check to make sure that the left/right margin of the
prints is as indicated.
3) Tighten the screw.
2.7.3 Adjusting the Front
Deck Pickup Horizontal
Registration
Make prints using the right deck and left deck as the
source of paper, and check to be sure that the left/
right margin is as indicated:
- if not, make the following adjustments:
1. Adjusting the Left/Right Margin for the Left
Deck
0003-9955
0003-9957