15Index Paper Attachment; 16Changing Paper Size Of The Front Deck (Left/Right) - Canon iR6570 Series Installation Procedure

Chapter 1
[1]
[2]
F-1-44
3) Mount the non-inch spacer in the package from the
inside of the cassette so that the hole (STMT-R) of
the stamp A [1] and the hole (LTR-R) of the stamp
H [2] are covered.
- Be sure to mount the spacer to keep in contact with
the cassette.
- This procedure should be conducted only when Inch
size paper is not used.
F-1-45
4) Check with the user to find out the size of paper to
use, and set the paper size of each cassette, and
attach the size label to the cassette size plate.
5) Slide the cassettes into the machine.
20
[1]
[2]
1.2.15
Index
Attachment
iR5570 / iR6570
1) Decide on either cassette 3 or 4 for use for index
paper.
Press the releasing button for the cassette, and slide
it out to the front.
Match the 2 one-touch supports [1] against the holes
[2] in the cassette; then, push in the pins to fix them
in place.
2) Place the index paper attachment [3] by matching
its holes against the one-touch supports [1].
3) Fit the base sheet [6] in the cassette.
Slid out the cassette.
[1]
[3]
[2]
F-1-46
1.2.16
Changing
Size of the Front Deck
(Left/Right)
iR5570 / iR6570
1) Press the release button to draw out the deck.
2) Remove the screws [4] of the end plate [1], left
plate [2], and right plate [3]. Adjust these plates to
a paper size requested by user, and fix them.
Default: A4 size
After changing the size, put back the deck to the
machine.
Paper
0009-6944
[1]
[4]
Paper
0008-8104