Manual Pickup Sensor; Removing The Manual Tray Sensor; Manual Pickup Solenoid; Removing The Manual Pickup Solenoid - Canon MF6500 Series Service Manual

Chapter 7
3) While holding the manual separation pad [1], release the right hook [2]
and then slide the right bearing [3].
4) Remove the manual pickup roller [4].
[4]
[1]

7.6.7 Manual Pickup Sensor

7.6.7.1 Removing the Manual Tray Sensor

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the left cover and rear-left cover.
2) Remove the relay PCB, registration clutch, and pickup drive unit.
3) Disconnect the connector [1], release the claw, and then remove the
manual tray sensor [2].
[1]

7.6.8 Manual Pickup Solenoid

7.6.8.1 Removing the Manual Pickup Solenoid

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the left cover and rear-left cover.
2) Disconnect the connector [1], remove the screw [2], and then remove the
manual tray pickup solenoid [3].
7-8
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[2]
[1]
F-7-16
[3]
[2]
F-7-17
[2]
F-7-18

7.6.9 Manual Separation Roller

7.6.9.1 Removing the Manual Separation Pad

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the manual pickup roller.
2) While holding the manual separation pad [1], release the claw [3] and slide
the left bearing [4] with attention paid to the sensor flag [2].
0011-5384
3) With the flathead screwdriver inserted as shown below, remove the
manual pickup pad [1].

7.6.10 Registration Roller

0011-5382

7.6.10.1 Removing the Registration Roller

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the rear cover and rear-left cover.
2) Remove the fun duct, main motor, relay PCB, registration clutch, pickup
drive unit, and main drive unit.
3) Remove the transfer guide.
4) Remove the two springs [1].
5) Remove the two bearings [2], and then remove the right registration roller
[1] [3] [2]
F-7-19
[4]
[2] [3] [1]
F-7-20
[1]
F-7-21
0011-5377
0011-5378