CS9350 OPERATION MANUAL
5.1.19
CR Maintenance menu
Performs maintenance.
Used in the following cases.
•
Cleaning the cleaning wiper
•
Cleaning around the print head
•
Replacing Cutter
6.1.3 Replacing Cutter
Setup item
CR Maintenance
5.1.20
Initialization menu
Returns the settings of the printer to default.
Setup item
Initialization
6.2.4 Cleaning the cleaning wiper
6.2.5 Cleaning around the print head
Setting
Start
End
—
Setting
ALL
User Type
Settings other than User Type The setting other than the User Type is returned to factory
—
5-129
Description
Performs maintenance.
•[Enter] key:
The print head moves to the left of the printer.
The cleaning wiper sifts towards the front.
Completes maintenance.
•[Enter] key:
The cleaning wiper returns to the original position.
Print head returns to the original position.
•[Cancel] key: shifts to the previous menu without
maintenance.
5.1 Setup menu
Description
All settings can be returned to factory default.
The setting of the User Type is returned to factory default.
default.
•[Enter] key:
"** Initialling **" is displayed on the operation panel and
the printer initializes the setting.
•[Cancel] key: shifts to the previous menu without
initialization.
5.1 Setup menu