4.3
Operating from the operation panel
TIP
For names and functions of each key, refer to "2.2.3 Operation panel".
4.3.1
Feeding media
You can feed the roll media at a position that you want.
Step 1:
Confirm that the operation panel is Normal.
Step 2:
Make sure that the media loading lever is lowered.
Step 3:
Press the [Forward↓] key or the [Backward↑] key on the operation panel.
•
Media is fed forward or backward.
Step 4:
Release the [Backward↑] key or [Forward↓] key on the operation panel after feeding media to
the desired position.
4.3.2
Stopping printing operation
Step 1:
Stop sending printing data from the computer to the printer.
Step 2:
Press the [Cancel] key on the operation panel for two seconds.
•
The printer operates as follows.
4-84
CS9350 User's Guide