Prepare Printer For A Long Shut-Down Period - Oce VarioPrint i Series Operation Manual

Prepare printer for a long shut-down period

When the printer is in shut-down mode, the printer needs time to perform the automatic
printhead maintenance and to warm up. The time the printer needs to warm up depends on the
print room temperature. If the print room temperature strongly deviates from the specifications,
the printer needs more time to warm up.
Use the automatic shut-down and wake-up functions to ensure that the warming up occurs
before the first jobs are scheduled. (
When you expect that the shut-down period takes more than two days, you need to perform
several tasks to ensure that the printer functions optimally after awakening.
Task
Remove media from paper trays
Empty and refill conditioning liquid in paper
modules
Replace the waste water container
Replace the waste containers
Configure the energy save timers on page
Load media into the paper module on page 80
Refill the conditioning liquid in the paper mod-
ule on page 297
Replace the waste water container on
page 294
Replace or add consumables on page 284
Prepare printer for a long shut-down period
275)
Chapter 11 - Save energy 277