Show Banner - Cisco 300 Series Cli Manual

2
52
Token Information displayed in the banner
$(contact) Displays the system contact string.
$(location) Displays the system location string.
$(mac-address) Displays the base MAC address of the device.
Use the no banner login Line Configuration command to disable the Login banner
on a particular line or lines.
Example
The following example sets a Login banner that uses tokens. The percent sign (%)
is used as a delimiting character. Note that the $(token) syntax is replaced by the
corresponding configuration variable.
switchxxxxxx(config)# banner login %
Enter TEXT message. End with the character '%'.
You have entered $(hostname).$(domain)
%
When the login banner is executed, the user will see the following banner:
You have entered host123.ourdomain.com
2.20

show banner

Use the show banner commands in EXEC mode to display the banners that have
been defined.
Syntax
show banner login
Parameters
This command has no arguments or keywords.
Command Mode
EXEC mode
Examples
User Interface Commands
78-21075-01 Command Line Interface Reference Guide