Show Ip Ssh-Client - Cisco 300 Series Cli Manual

SSH Client Commands
78-21075-01 Command Line Interface Reference Guide
Syntax
ip ssh-client username
no ip ssh-client username
Parameters
string— Username of the SSH client.The length is 1 - 70 characters. The username
cannot include the characters "@" and ":".
Default Configuration
The default username is anonymous
Command Mode
Global configuration
User Guidelines
The username cannot include the characters "@" and ":".
The configured username is used when SSH client authentication is done both by
password or by key.
Example
The following example specifies a username of the SSH client:
switchxxxxxx(config)
6.8

show ip ssh-client

Use the show ip ssh-client command in Privilege EXEC mode to display the SSH
client credentials, both default and user-defined keys.
Syntax
show ip ssh-client
show ip ssh-client {mypubkey | key} {dsa | rsa}
Parameters
•
dsa— Specifies displaying the DSA key type.
string
# ip ssh-client username jeff
6
129