Show Ports Security - Cisco 300 Series Cli Manual

Address Table Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example displays the unregistered Multicast configuration.
switchxxxxxx# show bridge multicast unregistered
Port Unregistered
------- -------------
gi1 Forward
gi2 Filter
gi3 Filter

29.32 show ports security

Use the show ports security Privileged EXEC mode command to display the
port-lock status.
Syntax
[interface-id | detailed
show ports security
Parameters
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Display for all interfaces. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the port-lock status of all ports.
switchxxxxxx# show ports security
]
29
443