Qos Statistics Aggregate-Policer; Qos Statistics Queues - Cisco 300 Series Cli Manual

Quality of Service (QoS) Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example enables counting in-profile and out-of-profile on the
interface.
switchxxxxxx(config-if)#

49.40 qos statistics aggregate-policer

Use the qos statistics aggregate-policer Global Configuration mode command to
enable counting in-profile and out-of-profile. Use the no form of this command to
disable counting.
Syntax
qos statistics aggregate-policer
no qos statistics aggregate-policer
Parameters
aggregate-policer-name—Specifies the aggregate policer name.
Default Configuration
Counting in-profile and out-of-profile is disabled.
Command Mode
Global Configuration mode
Example
The following example enables counting in-profile and out-of-profile on the
interface.
switchxxxxxx(config)#

49.41 qos statistics queues

Use the qos statistics queues Global Configuration mode command to enable
QoS statistics for output queues. Use the no form of this command to disable QoS
statistics for output queues.
qos statistics policer
aggregate-policer-name
aggregate-policer-name
qos statistics aggregate-policer
policy1 class1
policer1
49
835