Show Clock - Cisco 300 Series Cli Manual

7
Clock Commands
Command Mode
Global Configuration mode
User Guidelines
Up to 8 SNTP servers can be defined.
The sntp unicast client enable Global Configuration mode command enables
predefined Unicast clients.
The sntp unicast client poll Global Configuration mode command globally enables
polling.
Example
The following example configures the device to accept SNTP traffic from the
server on 192.1.1.1 with polling.
switchxxxxxx(config)# sntp server 192.1.1.1 poll
7.16

show clock

The show clock EXEC mode command displays the time and date from the system
clock.
Syntax
detail
show clock [ ]
Parameters
detail—Displays the time zone and summer time configuration.
Command Mode
EXEC mode
Examples
Example 1 - The following example displays the system time and date.
switchxxxxxx#
show clock
15:29:03 PDT(UTC-7) Jun 17 2002
148 78-21075-01 Command Line Interface Reference Guide