Cisco 300 Series Cli Manual page 181

Configuration and Image File Commands
78-21075-01 Command Line Interface Reference Guide
no lldp run
interface vlan 1
ip address 1.1.1.1 255.0.0.0
exit
line console
exec-timeout 0
exit
switchxxxxxx#
Example 2 - The following example displays the Startup Configuration file
contents for ports 1 and 2.
switchxxxxxx# show startup-config interface gi1-2
interface gi1
back-pressure
duplex half
speed 10
flowcontrol on
negotiation 10h 100h 100f
dot1x max-req 8
description "Hello World String"
lacp timeout short
lacp port-priority 1234
port security max 111
port security mode max-addresses
spanning-tree disable
spanning-tree portfast auto
spanning-tree link-type point-to-point
spanning-tree cost 200000
spanning-tree port-priority 224
spanning-tree guard root
spanning-tree mst 2 port-priority 64
9
181