Dhcp Relay Commands; Ip Dhcp Relay Enable (Global); Ip Dhcp Relay Enable (Interface) - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
DHCP Relay Commands
78-21075-01 Command Line Interface Reference Guide
46.1
ip dhcp relay enable (Global)
Use the ip dhcp relay enable Global Configuration mode command to enable the
DHCP relay feature on the device. Use the no form of this command to disable the
DHCP relay feature.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
Parameters
N/A
Default Configuration
DHCP relay feature is disabled.
Command Mode
Global Configuration mode
Example
The following example enables the DHCP relay feature on the device.
switchxxxxxx(config)#
46.2
ip dhcp relay enable (Interface)
Use the ip dhcp relay enable Interface Configuration (VLAN, Ethernet,
Port-channel) mode command to enable the DHCP relay feature on an interface.
Use the no form of this command to disable the DHCP relay agent feature on an
interface.
ip dhcp relay enable
46
759
Advertisement
Table of Contents
