29
422
•
interface-list
ethernet
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
•
port-channel-list
port-channel
nonconsecutive port-channels with a comma and no spaces. Use a hyphen
to designate a range of port channels.
Default Configuration
Forwarding of all Multicast packets is disabled.
Command Mode
Interface Configuration (VLAN) mode
Example
The following example enables all Multicast packets on port gi8 to be forwarded.
switchxxxxxx(config)#
switchxxxxxx(config-if)#
29.16 bridge multicast forbidden forward-all
Use the bridge multicast forbidden forward-all Interface Configuration (VLAN)
mode command to forbid a port to dynamically join Multicast groups. Use the no
form of this command to restore the default configuration.
Syntax
bridge multicast forbidden forward-all
port-channel port-channel-list}
no bridge multicast forbidden forward-all
Parameters
•
add—Forbids forwarding of all Multicast packets.
•
remove—Does not forbid forwarding of all Multicast packets.
•
ethernet interface-list
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
—Specifies a list of Ethernet ports. Separate
—Specifies a list of port channels. Separate
interface vlan
2
bridge multicast forward-all add gi8
{add | remove} {ethernet interface-list |
—Specifies a list of Ethernet ports. Separate
78-21075-01 Command Line Interface Reference Guide
Address Table Commands