Mac Address-Table Aging-Time - Cisco 300 Series Cli Manual

29
428
Syntax
show bridge unicast unknown [interface-id]
Parameters
interface-id—Specify an interface ID. The interface ID can be one of the following
types: Ethernet port or port-channel
Default
Command Mode
EXEC
Example
switchxxxxxx
# show bridge unicast unknown
Port Unregistered
------ -------------
1/1 Forward
1/2 Filter
1/3 Filter

29.21 mac address-table aging-time

Use the mac address-table aging-time Global configuration command to set the
aging time of the address table. Use the no form of this command to restore the
default.
Syntax
mac address-table aging-time
no mac address-table aging-time
Parameters
seconds—Time is number of seconds. (Range:10–10-630)
seconds
78-21075-01 Command Line Interface Reference Guide
Address Table Commands