Voice Vlan Cos - Cisco 300 Series Cli Manual

Voice VLAN Commands
78-21075-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
Example
The following example applies QoS attributes to voice packets.
switchxxxxxx(config)#
33.8

voice vlan cos

Use the voice vlan cos Global Configuration mode command to set the OUI Voice
VLAN Class of Service (CoS). Use the no form of this command to restore the
default configuration.
Syntax
cos cos [remark]
voice vlan
no voice vlan cos
Parameters
•
cos
cos —Specifies the voice VLAN Class of Service value. (Range: 0–7)
•
remark—Specifies that the L2 user priority is remarked with the CoS value.
Default Configuration
The default CoS value is 5.
The L2 user priority is not remarked by default.
Command Mode
Global Configuration mode
Example
The following example sets the OUI voice VLAN CoS to 7 and does not do
remarking.
switchxxxxxx(config)#
voice vlan cos mode
7
voice vlan cos
all
33
535