Ip Ssh-Client Change Server Password - Cisco 300 Series Cli Manual

SSH Client Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example specifies that, username and public key are used for
authentication:
switchxxxxxx(config)
6.2

ip ssh-client change server password

Use the ip ssh-client change server password command in Global Configuration
mode to change a password of an SSH client on a remote SSH server.
Syntax
ip ssh-client change server password server
username username
Parameters
•
host—DNS name of a remote SSH server.
•
ip-address—Specifies the IP address of a remote SSH server. The IP
address can be an IPv4, IPv6 or IPv6z address. See IPv6z Address
Conventions.
•
username — Username of the local SSH clients (1 - 70 characters).
•
old-password — Old password of the local SSH client (1 - 70 characters).
•
new-password— New password for the local SSH client (1 - 70 characters)
The password cannot include the characters "@" and ":".
Default Configuration
N/A
Command Mode
Global configuration
User Guidelines
Use the command to change a password on a remote SSH server. Use
ssh-client password
so that it matches the new password set on the remote SSH server.
# ip ssh-client authentication public-key rsa
old-password old-password
to change the SSH client password of the switch's SSH client
{host ip-address ipv6-address}
| |
new-password new-password
6
ip
121