Ip Igmp Query-Interval - Cisco 300 Series Cli Manual

IGMP Snooping Commands
78-21075-01 Command Line Interface Reference Guide
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created, but you must enter the
command in Interface VLAN mode.
Example
switchxxxxxx(config)# interface vlan 1
switchxxxxxx(config-if)# ip igmp robustness 3

38.13 ip igmp query-interval

Use the ip igmp query-interval Interface Configuration (VLAN) mode command to
configure the Query interval on a VLAN. Use the no format of the command to
return to default.
Syntax
ip igmp query-interval
no ip igmp query-interval
Parameters
seconds—Frequency, in seconds, at which IGMP query messages are sent on the
interface. (Range: 30–18000)
Default Configuration
125
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
seconds
38
645