Clock Summer-Time - Cisco 300 Series Cli Manual

7
136
Parameters
•
zone—The acronym of the time zone.(Range: Up to 4 characters)
•
hours-offset—Hours difference from UTC. (Range: (-12)–(+13))
•
minutes-offset—Minutes difference from UTC. (Range: 0–59)
Default Configuration
Offsets are 0.
Acronym is empty.
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display
purposes and when the time is manually set.
Example
switchxxxxxx(config)# clock timezone abc +2 minutes 32
7.4

clock summer-time

Use one of the formats of the clock summer-time Global Configuration command
to configure the system to automatically switch to summer time (Daylight Saving
Time). Use the no form of this command to configure the software not to
automatically switch to summer time.
Syntax
zone recurring {usa | eu | {week day month hh:mm week day
clock summer-time
month hh:mm}} [offset]
zone date day month year hh:mm date month year hh:mm
clock summer-time
[offset]
zone date month day year hh:mm month day year hh:mm
clock summer-time
[offset]
78-21075-01 Command Line Interface Reference Guide
Clock Commands